Introducing 034Motorsport Tubular adjustable control arms for Audi Small Chassis applications, after years of development finally we are prepared to offer a readily available, true motorsport quality control arm solution for vintage small chassis Audis.
The OEM Audi arm is either a flimsy stamped sheet metal assembly or a heavy, non-adjustable cast unit. The 034Motorsport control arm, while not the lightest option, is incredibly strong and offers a great range of alignment adjustability. Caster can be adjusted by moving subframe spacers on the heim, and also by offesetting depth for the heims. Camber can be adjusted by changing the depth of the heims and also the slotted ball joint.
Factory sway bar links are not a direct fit, we recommend relocating sway bar end links to the strut housing, we include a steel weld tab to allow an attachment provision, the end link will need to be modified by the installer, in the future we may offer a bolt on solution for this.. Perfect for road race cars, rally cars or those looking for the finest quality part to feature on their pride and joy.
Genuine Aurora 5/8" Rod Ends with Teflon coating, jam nuts included
Includes slotted ball joint provision just like factory arm
Includes all hardware needed to install (ball joint not included)
Includes billet aluminum spacers to move arm forward or back to allow caster changes
Adjustable for a wide range of alignment settings including extended camber and caster
Zero slop design, all solid construction for no deflection or alignment changes to maintain suspension geometry and steering accuracy
Includes all hardware needed including bolts for inner heims, clamping plate and ball joint
Light weight at 4.5lbs - Factory cast arm weighs 8lbs, stamped steel arm at 5.5lbs.
Fits virtually all small chassis Audis and VW's based off Audi Chassis such as 4000, 80/90, Coupe Quattro, Original Quattro, Quantum, S2, RS2.
This is the finest quality realization of this part, we don't take ANY chances on safety or performance with this part, its just not worth cutting corners to have a wheel fall off your car at the worst possible time.
Arms are not painted, we recommend doing so or choose the powder coating option below.
Priced each, please order quantity 2 for a pair.
*Ball joints pictured not included, but can be added below at an additional cost below. These arms will accept most Audi 2-bolt ball joints, specifically any ball joint from a B3 chassis application.
Installation Note - Due to the fact that this arms is precision machined and not a steel stamping like OEM, and that ball joints feature a cast finish, installation of the ball joint may be tight, which is OK.. Clearance the ball joint if needed as ball joint castings can vary .5mm or more.
To obtain a shipping estimate for this item please Log On
This product was added to our catalog on Tuesday 06 September, 2011.