Fully adjustable upper control arms for theB5/B6/B7 and C5 chassis cars, perfect for those who have lowered their car from OEM ride height and now have excessive camber which causes accelerated tire wear on the street.
Features:
CNC Machined Billet 6061 Construction, Black Anodized Finish
Built in Safety Washer to eliminate any chance of the spherical ever separating
Arm sets ship set to factory OEM length
Over 5/8" of outward adjustability, adjustable in 1/36" increments, each 1/36 adjustment is approximately .1 degrees for highly accurate adjustments, no tightening creep like you get with a turn buckle
Adjustments can be easily made by threading out an M6 head allen bolt, the pinch pin stays installed in the upright. A jam nut keeps everything tight once adjusted.
Dust boots are now included with all adjustable upper control arms. We ship the boots uninstalled; once you have the alignment set, install the dust boots before final installation.
Arms ship with everything pictured and assembled, price for one kit for one front suspension.
Note - Do not run the heims with less than 8 threads in the control arm itself, less threads can cause failure of the part and 034Motorsport will not be responsible for installation errors. If your alignment requires that you must have less than 8 threads engaged then contact us, but do not run the car with less than 8 threads engaged!
Control arms do not have to be removed to adjust camber. Please see the video below highlighting the ease of adjustment.
034Motorsport Density Line & Spherical lower control arms are available as an option below.
See install document for installing dust boots:
To obtain a shipping estimate for this item please Log On
This product was added to our catalog on Wednesday 16 June, 2010.
