Check out our new Dynamic+ Tuning Software here!

034Motorsport is proud to formally announce Dynamic+ Performance ECU & TCU Software for the MK7/7.5 Volkswagen Golf, Sportwagen, Alltrack, & 8V Audi A3 equipped with the EA888.3 1.8T TFSI engine and DQ250 DSG transmission tuning! Gain up to 91 Horsepower and 119 FT-LB of Torque with just an ECU flash and accompanying hardware! 

Stage 1 Dynamic+ Performance TCU Software for DQ250 equipped models further enhances the shifting and acceleration of your DSG equipped 1.8T! Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the DQ250 TCU safely and effectively optimize operation for Stage 1 Dynamic+ Performance ECU Software.

Note: Dynamic+ ECU Software is compatible with DQ250 DSG, 6MT Manual, and Aison AQ250 transmission equipped vehicles. See the product page for a full, in-depth breakdown of the key optimizations that the 034Motorsport Calibration team implemented in this full tuning bundle.

Performance:

  • Stock: 179 HP / 211 TQ
  • Stage 1 87: 214 HP / 272 TQ
  • Stage 1 91: 230 HP / 291 TQ
  • Stage 1 93: 238 HP / 301 TQ
  • Stage 1 E85: 261 HP / 322 TQ

ECU Flash Features:

  • Calibrations Available for 87, 91, 93, and E85 Octanes. (AKI)
  • Increased Horsepower & Torque Throughout the Powerband
  • Improved Power Delivery, Acceleration, and Driving Characteristics
  • Refined Throttle Mapping for Enhanced Throttle Response & Precision
  • Modified Thermal Management Safety Strategies
  • Fuel System Optimization for Ethanol
  • Accurate Boost and Torque Reporting for Safety Features
  • Speed Limiter Removed for Increased Top Speed
  • Launch Control Strategy Optimizations
  • Turbo Safety Strategies for Performance at High Elevation
  • Flashed Directly Via the Factory OBD-II Port

TCU Flash Features:

  • Shift Speeds Increased
  • Optimized Shift Points in Drive & Sport Mode
  • Increased DSG Clutch Clamping Force
  • Improved Responsiveness
  • No Kickdown Downshifts in Manual Mode
  • Launch Control Enabled on All Models
  • Gear Display Indicator on MFD Enabled in All Driving Modes

Check out our new S34 Intake for the Audi C7/C7.5 S6/S7 here!

034Motorsport's S34 Carbon Fiber Intake System delivers improved power, sound, and acceleration to Audi C7/C7.5 S6/S7 owners within a clean, cost-effective package.

Through extensive evaluation of the factory airbox design, 034Motorsport's engineers were able to create a high-performance system that allows for increased airflow to the turbocharger and engine. The S34 Carbon Fiber Intake System offers measurable performance improvements, simple bolt-on installation, and unsurpassed fit and finish.

PRODUCT FEATURES & DETAILS:

  • Developed In-House by 034Motorsport's Engineering Team
  • Fits Both Left and Right Hand Drive Configurations
  • High-Quality Carbon Fiber Air Block-off Shield
  • High-Gloss Epoxy Finish
  • 4-Ply Gloss Black Silicone Intake Tubes
  • OEM+ Fit and Finish
  • No Rubbing or Excessive Movement
  • Dyno-Proven Horsepower Torque Gains
  • Improved Airflow Over Factory Airbox, Intake Tube, and Turbo Inlet
    • Stock Intake: 527 CFM
    • 034 Intake Hose and Filter: 816 CFM
  • Enhanced Engine Induction Sounds
  • Improved Throttle Response
  • Large 4" Dual Flange Oval Tapered SuperDuper Filter
  • Reduced Intake Air Temperature
  • Securely Installs Using Factory Mounting Grommets
  • Simple, Straightforward Installation Instructions

Check out our new Billet Oil Cap here!

The 034Motorsport Billet Oil Cap for EA839 V6 2.9T/3.0T Engines is designed to replace the factory plastic oil cap. The 034Motorsport Billet Oil Cap is CNC machined from 6061-T6 aluminum and is anodized bright black for lifelong great looks, topped off with a 034Motorsport logo. Transform the engine bay of your EA839 equipped car with the beautiful and sexy 034Motorsport Billet Oil Cap.

The 034Motorsport Billet Oil Cap for EA839 is designed to have a tighter seal with the factory PCV system to prevent catastrophic failure in the event your breather hose system fails.


*Note: The 034Motorsport Billet Oil Cap is not a fix for the faulty PCV system, but is designed to mitigate the risk of further engine damage and engine fires due to the rapid evacuation of engine oil.

FEATURES:

  • CNC Machined from Billet 6061-T6 Aluminum
  • Bright Black Anodized for Life Long Great Looks
  • Locks Into Place With a Positive "Click"
  • Engineered for a Leak-Free Interface When Fitted, Even When Hot
  • Reuses OE Seal
  • Easy Fitment; Takes Less Than a Minute to Install
  • DIY Tool Resources to 3D Print or Fabricate

PART INTERCHANGE:

  • 06M 103 485 C
  • 06M 103 485 D

WHAT'S INCLUDED:

  • (1x) Billet Oil Cap

We at 034Motorsport want to extend a huge congratulations to our customer Arnon, for setting the quickes & fastest 1/4 mile times ever run for the B9/B9.5 RS5 2.9T platform. Arnon was able to run a 10.619 at 126.89mph while running 034Motorsport Stage 2+ Stock Turbo ECU Tuning. After upgrading to The Turbo Engineers TTE720 Hybrid Turbos, Arnon ran a blistering 9.843 at 139.82mph in his RS5. We're proud to showcase Arnon's amazing build, rocking a host of 034Motorsport Upgrades. Drag racing is a cornerstone of 034's beginning, and we love to see our customers hit the track and show what they can do with the power of Dynamic+ tuning, pushing the envelope of the platform!

Stock Turbo World Record - 10.619 @ 126.89mph

Arnon is no stranger to sending his Audi’s down the drag strip - and being a member of the B9 community since 2018, he has set some of the world’s fastest times. Recently, he set out to prove how transformative the high-performance Dynamic+ Tuning is for his stock turbo RS5!

From Arnon: “I want to emphasize the consistency of the tune at the strip. I ran 12 times. Every single pass was within a 3 MPH delta ranging from 125-128.55. Not a single hiccup on power. The key differentiator on my E/T and trap speed was my own launch strategy and grip. At about the 4PM hour, I literally made 4-5 passes. Some of the passes I made were within minutes of each other. Some as soon as 4 minutes basically driving back to the line immediately and going again. I’m astounded by the consistency.”

His quickest and fastest pass was backed up with a blisteringly quick 10.621 at 128.82mph, setting the benchmark for one of the quickest customer owned RS5’s we’ve seen on stock turbos!

Modifications:

034Motorsport Stage 2+ E85 High Grip Launch
034Motorsport Stage 2 TCU Tune

Upgraded Intake + Inlet
Upgraded Intercooler
Mercracing Heat Exchanger
Upgraded HPFP
AWE Touring Edition Exhaust
Removed Catalysts
034Motorsport Billet Drivetrain Inserts
034Motorsport Front + Rear Sway Bars & End Links
034Motorsport Strut Brace
Removed Seats
034Motorsport 2-Piece Rotors
Enkei RPF1 with 245/40/18 Hoosier DR2
-1056 ft. DA

TTE720 Hybrid Turbochargers - 9.843 @ 139.82mph

A massive congratulations to Arnon, for achieving an incredible milestone with his B9 Audi RS5. Arnon's car is now the quickest & fastest Hybrid Turbo Audi RS5, with an astonishing time of 9.843 seconds at 139mph in the 1/4 mile. This accomplishment places Arnon’s RS5 amongst the elite, as one of only two B9 RS5s globally to break the 9 second barrier, including the 034Motorsport Development B9 Audi RS5.

With Dynamic+ Software, we aim to provide consistent and repeatable performance for your B9/B9.5 2.9T equipped car. With 5 consecutive 9 second ¼ mile passes, all above 137mph and within .03 seconds of each other, Arnon's B9 RS5 demonstrates exactly that. 034Motorsport ECU and TCU software are designed to perform consistently and safely in all uses. Whether you're on a road course, drag strip, road trip, or are simply commuting day to day in hot and cold weather, Dynamic+ Tuning maximizes all available safety features found in the MG1 ECU to ensure that your car is running at its best, every time.

Modifications:

034Motorsport Stage 3 E60-E70
034Motorsport Stage 3 TCU Tune

Upgraded Intake + Inlet
TTE720 Hybrid Turbochargers
Wagner Tuning Competition Intercooler & Heat Exchanger
Upgraded HPFP
AWE Touring Edition Exhaust
Removed Catalysts
034Motorsport Billet Drivetrain Inserts
034Motorsport Front + Rear Sway Bars & End Links
034Motorsport Strut Brace
Removed Seats
034Motorsport 2-Piece Rotors
Enkei RPF1 with 245/40/18 Hoosier DR2

Questions about how 034Motorsport Tuning and Hardware can have your car running the same times? Email sales@034motorsport.com and our team will be happy to assist!

We at 034Motorsport want to extend a huge congratulations to our customer David Musiyenko, the person behind the Need4Built YouTube Channel, for setting the fastest 1/4 mile time ever run for the B9/B9.5 SQ5 3.0T platform, with a 9.995 at 135.32MPH. This is the first Audi SUV to run a 9-second quarter-mile time and we're proud to showcase David's build, rocking a host of 034Motorsport Upgrades. Drag racing is a cornerstone of 034's beginning, and we love to see our customers hit the track and show what they can do with the power of Dynamic+ tuning, pushing the envelope of the platform!

Modifications:

Weight Reduction:

  • 034 2-Piece Rotors = -25lbs
  • Door Cards= -30lbs
  • All Seats= -220lbs
  • Carbon Fiber Driver Seat= +5lbs
  • Trunk Components= -30lbs
  • Exhaust= -30lbs
  • Drag Wheels/Tires= -120lbs

Consistency:

With Dynamic+ software, we aim to provide consistent and repeatable performance for your B9/B9.5 3.0T equipped car. With 3 consecutive 10 second ¼ mile passes, all above 135mph and within .03 seconds of each other, David's B9 SQ5 demonstrates exactly that. David was also able to maximize 034Motorsport's Launch Control strategy to consistently run a 1.4x 60ft on all three runs. 034Motorsport ECU and TCU software are designed to perform consistently and safely in all uses. Whether you're on a road course, drag strip, road trip, or are simply commuting day to day in hot and cold weather, Dynamic+ Tuning maximizes all available safety features found in the MG1 ECU to ensure that your car is running at its best, every time.

9-second passes in a 4,400lb SUV don't come with ease, and David's pass was simply no exception! When testing out his new Carbon Fiber Hood on the first pass of the day, his hood unfortunately flew off. David still ran a 10.18 in the 1/4 while on the brakes at the 1000ft! While this could have cut his day short, David went home, put his OEM hood back on, and headed back to the track and ran his 9-second pass! Unfortunately, his day was cut short after a charge pipe blew off.

What About Full Weight?

With the same modifications and massive 22" wheels in a full weight configuration, David's SQ5 crosses through the 1/4mi in 10.38 seconds at 134.03mph!

Track Conditions:

Questions about how 034Motorsport Tuning and Hardware can have your car running the same times? Email sales@034motorsport.com and our team will be happy to assist!

Don't Miss Out On These Limited Time Deals!

It's the LAST WEEK to save up to 10% off 034Motorsport's ZTF Wheels, Dynamic+ Tuning, & more during the Unsprung Sale!

Drop the unsprung weight of your Volkswagen or Audi today with these high-performance deals, including savings on ZTF Wheels, Lowering Springs, Wheel Spacers, Wheel Stud Kits & 2-Piece Brake Rotors!

Take advantage of these deals while you still can - Sale Ends 4/15!

PRODUCT DESCRIPTION:

The 034Motorsport Billet Aluminum DSG Breather Catch Can for the Audi 8V.5 RS3 replaces the tiny OE plastic vent and prevents transmission fluid from being forced out and splashing around the engine bay. Any transmission fluid that is collected in the catch can drains back into the transmission. Improve the appearance of your RS3's engine bay by installing this beautiful billet catch can and eliminating unsightly oil stains.

The body of the catch can is CNC milled from 6061-T6 billet aluminum and black anodized for a durable and stealthy finish. Internally, a stainless steel baffle plate prevents transmission oil from escaping the system. External mounting brackets are powder coated to prevent corrosion and enhance appearance. The OEM plastic vent hose is replaced with 8mm I.D. silicone vent hose while retaining the OE connector at the transmission. Finally, all mounting points for the DSG catch can are stock mounting points, which makes for an easy installation with no drilling or cutting necessary.

FEATURES:

  • 6061-T6 Billet Aluminum Housing
  • Black Anodized Finish for Durability and Stealth
  • Stainless Steel Internal Baffle Plate
  • Powder Coated Vehicle Mounting Brackets
  • 8mm I.D. Silicone Vent Hose
  • Retains the OE Connector at the Transmission
  • Utilizes Available Stock Mounting Points
  • Eliminates Transmission Oil Splatter in Engine Bay

WHAT'S INCLUDED:

  • Billet Aluminum DSG Catch Can Body with Brackets x1
  • 8mm I.D. Silicone Vent Hose x2ft
  • Zinc Plated Steel 14mm x 1.5 Banjo Bolt x1
  • Custom-Machined Billet Aluminum 14mm Banjo Fitting x1
  • 14mm x 20mm Aluminum Crush Washer x2
  • M8x16 Worm Drive Clamps x2
  • 14-15mm to 20-25mm Swivel Clip x1

PRODUCT DESCRIPTION:

Replace your flimsy, imprecise OEM sway bar end links with these performance-engineered Dynamic+ Billet Adjustable Rear Sway Bar End Links for BMW F2x/F3x/G2x Chassis cars from 034Motorsport!

034Motorsport's Dynamic+ Billet Adjustable Rear Sway Bar End Links allow for the uncompromised transfer of suspension movement to the sway bar, and are adjustable in length, allowing you to eliminate preload on the sway bar. 034Motorsport Dynamic+ Billet Adjustable Rear Sway Bar End Links use high-misalignment ball joints, ensuring that the end links do not bind as the suspension articulates.

This 034Motorsport Dynamic+ Adjustable Rear Sway Bar End Link Kit has the features, performance, and maintenance-free operation to make it a winner on the street and the track!

WHAT IS SWAY BAR PRELOAD?

When a sway bar is preloaded, it means that it is already twisted when the car is at rest, and it’s trying to roll the car to one side because of this. This will lead to asymmetric behavior and the car will favor tuning one way versus the other.

Preload is detectable when the car is at ride height on a flat surface, and removal of an end link is difficult because the sway bar is already twisted and applying force on the bolt, or installing the end link is difficult because the bar needs to be twisted to insert the bolt through the hole in the sway bar. With equal-length non-adjustable sway bar end links, removing preload is not possible.

By utilizing our 034Motorsport adjustable end links, the lengths of each end link can be adjusted so that the end link can be easily installed at ride height without needing to twist the bar to get it to fit. Zero preload provides symmetrical handling in right and left turns.

FEATURES:

  • CNC Machined 6061-T6 Aluminum Bodies (Anodized Black for Durability)
  • Zinc Plated Steel Ball Joints
  • OEM+ Quality with Adjustability
  • Quieter with Less Maintenance than Spherical Motorsport End Links
  • +/- 0.75" of Adjustability (1.5" Total Adjustment Range)
  • Adjust Sway Bar Preload - Essential When Corner Balancing Lowered Vehicles
  • Increased Strength for Stiffer Sway Bars, Heavier Loads, and Motorsport Use
  • Improved Sway Bar Reaction Time & Accuracy
  • Compatible with All Stock and Aftermarket Sway Bars.
  • Sold In Pairs

OE PART INTERCHANGE:

  • 33 50 6 785 607

WHAT’S INCLUDED:

  • 2x Billet Aluminum Adjuster Rods
  • 2x Dynamic+ Ball Joints - RH Thread
  • 2x Dynamic+ Ball Joints - LH Thread
  • 2x Jamb Nuts - RH Thread
  • 2x Jamb Nuts - LH Thread
  • 4x M10 Lock Nuts
  • 4x M10 Washers
  • Anti-Seize

PRODUCT DESCRIPTION:

Replace your fixed, stamped steel factory rear toe links on your BMW F2x/F3x Chassis with this performance engineered adjustable set from 034Motorsport!

034Motorsport's Motorsport Adjustable Rear Toe Links facilitate simple and precise toe adjustments, making alignment changes for optimal track performance or even tire wear easier than ever. In addition, Motorsport Adjustable Rear Toe Links feature Aurora spherical rod ends for ultimate precision and durability - ensuring that proper suspension geometry is maintained during hard cornering.

Motorsport Adjustable Rear Toe Links were thoroughly tested on the street and track on 034Motorsport's F30 BMW 340i Development Vehicle before release. These adjustable toe links are direct replacements for the stock parts, and designed to be fully serviceable and rebuildable.

FEATURES:

  • Fine Adjustment of Rear Toe
  • Eliminates All Bushing Deflection
  • Improved Handling
  • CNC Machined 6061-T6 Aluminum Tie Rod Bodies - Anodized Black for Durability
  • CNC Machined Aluminum Rod End Spacers
  • Aurora Spherical Rod Ends Featuring Self-Lubricating Teflon Race Lining
  • Designed For Easy, Precise, On-Car Adjustability
  • Direct Drop-In Replacements for Factory Toe Links
  • Fully Rebuildable
  • Sold In Pairs

OE PART INTERCHANGE:

  • 33-32-6-792-533

WHAT’S INCLUDED:

  • 2x Billet Adjustment Rods
  • 2x Aurora Spherical Rod Ends (RH Threads)
  • 2x Aurora Spherical Rod Ends (LH Threads)
  • 2x Jamb Nuts (RH Threads)
  • 2x Jamb Nuts (LH Threads)
  • 8x Billet 303 Stainless Steel Spacers
  • 4x Billet 6061 Aluminum Spacers
  • 4x Rubber Boots
  • 2x Anti-Seize

034Motorsport's Carbon Fiber Engine Cover Trim for the C8 RS6/RS7 is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that matches other aftermarket carbon fiber.

This genuine carbon fiber cover is an overlay for the plastic factory engine cover, retaining the factory Audi rings and RS logo for a true OEM+ appearance.

Features:

  • Carbon Fiber Weave Matches Other OEM and 034 Carbon Fiber Weaves
  • 034 Logo Included Uninstalled in the Box for Customer Choice of Branded or OEM+ Style Aesthetics
  • Easy Install with 3M VHB Double-Sided Tape

What's Included:

  • Carbon Fiber Trim - Left
  • Carbon Fiber Trim - Right
  • 2x 034 Brushed Stickers

Fitment:

  • 2019 - Present Audi C8 RS7
  • 2020 - Present Audi C8 RS6
Powered By CertiPro Solutions