034Motorsport Stainless Steel Subframe Locking Collar Upgrade Kit, MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8P Audi A3
034Motorsport's Stainless Steel Subframe Locking Collars are designed to eliminate subframe shifting and clunks in MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI/R32/Passat/Rabbit & 8P Audi A3/S3 cars by centering the subframe and upgrading factory bolts.
This kit includes 12 stainless steel subframe locating collars and 6 new bolts, and can be installed in approximately one hour for a more rigid chassis and improved handling performance.NVH Levels: None - Low
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. Based on user feedback, 034Motorsport Locking Collars transfer None to Low amounts of NVH to the cabin. NVH is subjective, so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure to components are correctly installed and email firstname.lastname@example.org for further assistance.
034Motorsport is pleased to present the Stainless Steel Subframe Locking Collar Upgrade Kit for the MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI/R32/Passat/Rabbit & 8P Audi A3! Designed to center the subframe using precision-engineered stainless steel insert bushings and large-diameter bolts, this kit eliminates clunks caused by the subframe shifting, and increases chassis rigidity for improved handling performance.
This kit addresses the very common subframe clunk/pop/creak that presents itself when taking slow turns, entering driveways, coming to a stop, and starting from a standstill. Unlike the band-aid shims used in the factory Volkswagen Technical Service Bulletin (TSB V-401202 & Others) repair, these locking collars and upgraded bolts are a permanent, affordable solution to address the fundamental issue with the factory subframe design.
The upper and lower collars in our kit are specifically machineded to locate the subframe and bolts perfectly and ensure hassle-free installation. The supplied bolts feature factory-correct tips and thread engagement points to prevent thread stripping. Unlike other kits on the market that use softer alloys, our Mk5/Mk6 VW Golf/Jetta/GTI/GLI/R32/Passat/Rabbit, Audi A3, Subframe Locking Collars are made from stainless steel to prevent deformation and ensure a lifetime of performance.
Installation is very straightforward and can be performed in approximately one hour. No permanent modification to the subframe is required, and this upgrade completely reversible.
- CNC-Machined Stainless Steel Locking Collars
- Application-Specific Design for Both Upper & Lower Locking Collars
- Engineered to Properly Locate (Center) Factory Front Subframe & Eliminate Shifting/Clunks
- Includes New Large-Diameter Subframe Bolts to Prevent Loosening
- Improves Chassis Rigidity & Handling Performance
- Addresses Volkswagen Subframe Knocking Noise TSB V-401202 & Others Permanently!
- Will Not Cause Additional NVH Transfer Inside Cabin
- Easy, Straightforward Installation Takes Approximately 1 Hour!
- 034Motorsport Stainless Steel Upper Subframe Locking Collars (Set of 6)
- 034Motorsport Stainless Steel Lower Subframe Locking Collars (Set of 6)
- High Strength Large-Diameter Factory Subframe Bolts (Set of 6)
- 2006 - 2014 Audi A3/S3 (8P)
- 2005 - 2009 Volkswagen GLI / GTI / Jetta / R32 / Rabbit (MkV)
- 2010 - 2014 Volkswagen GLI / Golf / GTI / Jetta (Aluminum Subframe Only) / Golf R (MkVI)
- 2005 - 2010 Volkswagen Passat (B6)
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov