034Motorsport X34 Carbon Fiber Cold Air Intake (CAI) for B5 Audi S4/RS4 2.7T
034Motorsport's X34 Carbon Fiber Cold Air Intake delivers improved power, sound, and acceleration to Audi B5 S4 owners in in an attractive, clean package. Through extensive evaluation of the factory airbox design, 034Motorsport's engineers were able to create a performance replacement that allows for increased airflow to the turbocharger and engine. The X34 Carbon Fiber Cold Air Intake offers measurable performance improvements, simple bolt-on installation, and unsurpassed fit and finish. The X34 utilizes a large open element filter combined with a beautifully designed carbon fiber heat shield to ensure that your turbos are drawing in cold, dense, filtered air. In addition, every X34 Cold Air Intake includes an ICM relocation kit to neatly move the factory ignition control modules out of sight.
The X34 Cold Air Intake is compatible with stock and aftermarket MAF housings, including our 034Motorsport Billet 2.7T MAF Housings.
034Motorsport's X34 Carbon Fiber Cold Air Intake delivers improved power, sound, and acceleration to Audi B5 S4 owners in a clean OEM+ package. Through extensive evaluation of the factory airbox design, 034Motorsport's engineers were able to create a performance replacement that allows for increased airflow to the turbocharger and engine, supporting up to 800hp! The X34 Carbon Fiber Intake System offers measurable performance improvements, simple bolt-on installation, and unsurpassed fit and finish. The X34 Carbon Fiber Cold Air Intake can be used with a stock or aftermarket MAF housing such as our 034Motorsport Billet MAF housings.
The 034Motorsport X34 Intake features a high-quality carbon fiber heat shield, carbon fiber air duct to the fresh air intake on the factory core support, 034Motorsport Performance Air Filter, and includes all installation hardware. This X34 Intake also includes mounting plate for ignition control modules, aluminum piping, silicone coupler, hose clamps, and rubber sealing strip.
034Motorsport focuses on optimizing every aspect of the intake system across a broad range of variables and compromises. A critical component of a high-flowing performance intake is the ability for air to flow around and into the filter. If the air cannot flow freely around the filter, it will be restricted from getting into it.
Many aftermarket kits fit too large of a filter in an enclosure that cannot accommodate its size, thus choking the filter and reducing its overall flow. This often happens when a product is engineered for one variable at the expense of others. 034Motorsport conducted extensive tests and refined its development of the intake design to allow for maximum airflow surrounding the air filter, allowing for optimal airflow to, and through, the filter.
The final result is the right size filter in the right size filter housing, creating maximum airflow and performance with OEM level filtering; the ultimate goal of any intake system. Be cautious of any intake that brags only of air filter size, without taking into account the detrimental effects of shrouding the filter.
The X34 Intakes house a high-flow conical air filter with a double-layer pleated cotton filtration medium, capable of trapping particles as small as 5 Microns. This air filter design offers increased flow through an enlarged filtration surface while ensuring superior filtration. We have tested this air filter in applications over 800HP with minimal restriction, and superior OEM quality air filtration.
While many intake kits leave the air filter unsupported and ”flopping” around, 034Motorsport engineers designed a clever air filter support that not only prevents unwanted movement but also allows compliance to accommodate engine movement under varying load conditions. An added benefit is an air shroud that doesn’t move and rub on other engine compartment components like many other designs on the market do.
- Fits Both Left and Right Hand Drive Configurations
- High-Quality Carbon Fiber Intake Shield Construction
- High-Gloss Epoxy Finish
- OEM+ Fit and Finish
- Improved Fuel Economy
- Dyno-Proven Horsepower Torque Gains
- Improved Airflow from Factory Airbox and Intake Tube
- Enhanced Engine Induction Sounds
- Improved Throttle Response
- 3.5" Inlet Conical Pleated Cotton Air Filter
- Large-Diameter CFD-Optimized Carbon Fiber Filter Tube
- Reduced Intake Air Temperature
- Completely Reversible Installation
- Carbon Fiber Heat Shield with Fiberglass Backing
- Carbon Fiber Fresh Air Duct with Fiberglass Backing
- ICM Relocation Plate & Screws
- 034Motorsport 3.5" Performance Air Filter
- Intake Pipe
- Silicone Coupler Set (For Stock or 85mm MAF Housings)
- Hose Clamps (Set of 3)
- B5 (2000-2002) Audi S4 2.7T
- B5 (2000-2002) Audi RS4 2.7T
- C5 (1999-2001) Audi A6 2.7T (May Require Slight Modification. Fresh Air Duct Not Compatible.)
- This product is sold for racing use as well as use on vehicles not registered for on highway use.
- By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.
Shipping Note: The shipping price may seem a little high on this due to "dimensional weight", though this product is extremely light it requires a large box which causes the freight companies to charge more.This item has a calculated shipping weight of 35 pounds due to the large dimensions of the box required for securely packaging the heat shield.
- Motor Mount, Density Line, B5, B6, B7, and C5 Audi ModelsAs low as $113.00
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov