Stage 1 2-Piece 365MM Floating Front Brake Rotor Upgrade Kit, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. The 034Motorsport 2-Piece Brake Rotors transfer none to low amounts of noise to the cabin based on user feedback. This NVH is relative to the brake pad installed with the brake rotor. Different brake pads will have different resonances when passing over a rotor with slots, which can sometimes make a slight whirring noise. The installation of other suspension components can also affect the NVH transferred. NVH is subjective, so some users may find NVH to be increased or decreased from our rating.
The 034Motorsport 365mmx34mm 2-Piece Floating Front Brake Rotor Upgrade Kit for the Gen 1 & 1.5 Audi R8 is a complete replacement brake rotor kit, designed to work flawlessly with the factory front calipers found on the Gen 1 & 1.5 Audi R8.
Weighing in at approximately 23lbs, each rotor reduces rotational weightby 1.5lbs on each corner over the factory 24.5lb rotors! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat
The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat.
The face of the rotor utilizes J-Slot slots to clean the pad and surface of contaminants and allows hot pad outgassing, all while reducing overall braking noise compared to a traditional slotted rotor.
The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.
- Lightweight Construction (23lb 034Motorsport Rotor vs. 24.5lb OE Audi Rotor)
- Floating, 2-Piece Design
- Aerospace Grade Aluminum Hats with Type III Hard Anodizing**
- CM-250 Special Alloy Rotor Rings
- J-slotted Friction Face
- OEM Fitment & Functionality
- 72 Curved Vanes Force Cooling Air through Brake Disc
- Floating Bobbins Mounting System
- Replaceable Rotor Rings
- Lower Long-term Maintenance Cost
- 034Motorsport 2-Piece Floating Front Rotor Pair
OE PART INTERCHANGE:
- 8T0 615 301
|Audi||R8||2006-2015||42||V8 4.2L FSI|
|Audi||R8||2006-2015||42||V10 5.2L FSI|
The installation of your 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 is straightforward and takes about one hour to complete. You can access our detailed installation guide by clicking the link below.
Download 2-Piece Floating Front Brake Rotor Upgrade Kit For Audi R8 Gen 1 & Gen 1.5 Install Guide
|Part Number Interchange||8T0 615 301|
- 034Motorsport T-Shirt, Audi R8 LinesAs low as $24.00
- 034Motorsport Women's T-Shirt, Audi R8 LinesAs low as $24.00
- ZTF-01 Coaster Set$22.00
- Dynamic+ Braking Packages, Gen 1 & Gen 1.5 Audi R8 (4.2 V8 & 5.2 V10)
From $1,943.89 Regular Price $2,269.00
To $2,049.53 Regular Price $2,408.00
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov