Billet Aluminum Upper Dogbone Mount Insert, MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI and 8P Audi A3/S3 & 8J Audi TT/TTS/TTRS

Kit Includes:

• 034Motorsport Upper Dogbone Mount Insert
• 034Motorsport Lower Dogbone Mount Insert Spacer

Features:

• CNC machined 6061 billet aluminum upper insert
• Clear anodized for a beautiful, corrosion resistant finish
• Water-jet cut aluminum lower insert spacer
• Lower insert spacer ensures upper and lower inserts don't touch and vibrate
• Eliminates bending moment in dogbone arm
• Ensures even compression of upper and lower dogbone mount pucks
• Eliminates wear on lower dogbone mount puck



Any dogbone mount combined with a lower dogbone mount insert dramatically improves the feel and responsiveness of the drivetrain during spirited driving. However, this combination of modifications has revealed a scenario that applies forces to the dogbone mount arm that it was not designed for. These forces have been seen to break OEM dogbone mounts. While billet aluminum aftermarket dogbone mounts have proven to be significantly stronger than OEM and resist this bending force, adding the upper insert removes this bending force while evenly distributing forces on both the upper and lower dogbone mount pucks, reducing excessive wear on the lower puck.

The lower dogbone mount insert limits compliance of the lower dogbone mount puck by filling large voids in the puck. During normal and spirited driving, this reduction in compliance results in more direct transitional response of the drivetrain to accelerative and decelerative forces. The driver feels more direct throttle response through the drivetrain without introducing a significant amount of NVH.

However, violent drivetrain shocks, such as burn-out induced wheel-hop, introduce additional forces that can cause damage to the dogbone mount arm. In these violent events, the lower puck motion is limited by the dogbone insert, but the upper puck in unconstrained and is free to move forward.

This means that the entire puck assembly rotates forward at an angle towards the front of the car. Because the dogbone mount arm is clamped into the puck assembly, the rotation of the puck assembly generates a bending moment applied to the dogbone mount arm that it was not designed for.