034Motorsport Blog

OVERVIEW: The 034 EFI STAGE I ECU's are lower cost and feature packed! They fill the need for those looking for a simpler yet fully capable system, in either fuel only, or with distributor ignition added, or 4 cylinder Waste Spark ignition!, The STAGE I ECU's uses the fastest, most up-to-date microprocessor available. One of […]

OVERVIEW: The 034 EFI STAGE II ECU is a progression of the original low cost, feature packed 034EFI ECU. The original was a fuel only engine controller that allowed a straightforward approach to replacing factory CIS, carbeuration and other EFI fuel control. The STAGE II ECU continues with an even faster microprocessor used in some […]

Your kit will include the following: One stainless steel shifter body (long, round, with a half- ball on the bottom) One aluminum shifter clamp (small, rectangular) One tall, skinny spring (green) One 12mm rubber O-ring One 12mm snap ring One white plastic half-ball One small white plastic bushing One M6x 25mm allen-head bolt Two ball […]

Tools Required: 5mm Allen Wrench Screw Driver 1/4” Drill 10mm wrench Installation Disconnect battery ground Remove 4 bolts securing stock coilpack to engine, remove 2 ¼ turn bolts securing black plastic cover behind engine. Unplug stock coil harness from 2 power output stages, 2 coil power connectors, and remove the ground ring at the back […]

This is an install document for rubber dust boots on 034Motorsport Adjustable Upper Control Arm Kits for the B5/B6B7/C5 Chassis   The only tool required would be a pair of needle nose pliers.  The boots shoudl only be installed after the final alignment adjustment has been set.   First step, stretch the boot open with the […]

Please Note: This installation guide features photos of a B5 fuel pump assembly our 60mm adapter. Other models will be very similar, and our 39mm adapter installation is also similar. Step 1: Remove your OE fuel pump assembly; we recommend doing this with the fuel level below 1/8th of a tank. Step 2: Use a […]

Sonu Atwal had been a long-time 034Motorsport customer when he picked up his latest project, a B5 Audi S4 Sedan that had been modified by the previous owner. The car already came with another company's full RS4 K04 turbocharger upgrade kit and tuning, as well as full downpipes and exhaust. Despite the existing modifications, he […]

When Audizine founder Anthony Marino approached us with his UrS6 Avant in search of more power, we were ecstatic to work with him on the project. If you can't already tell from the pictures of his car, Anthony is the kind of guy who prefers a clean, "OEM-plus" ride with subtle aesthetic changes to accentuate […]

This is an install document for rubber dust boots on 034Motorsport Adjustable Upper Control Arm Kits for the B5/B6B7/C5 Chassis and similar products. The only tool required is a pair of needle nose pliers.  The boots should only be installed after the final alignment adjustment has been set. First step, stretch the boot open with the pliers […]

Instructions shown for MkV Volkswagen GTI 2.0T FSI. Installation may vary slightly depending on exact model. 1)      Raise your vehicle securely using a lift or jackstands. 2)      Unbolt the exhaust hanger from the subframe. 3)      Locate the 12 bolts securing the subframe (circled in blue), and the 2 bolts attaching the dogbone (circled in red). Loosen the bolts […]