Brisk Racing DR10S Silver Spark Plug

Product Description:
The Brisk Racing DR10S spark plugs are ideal for cars with performance software upgrades and/or turbocharger upgrade kits running increased boost pressure. These long-life silver plugs will outperform the factory spark plugs are a recommended performance upgrade for a Stage 2 & 2+ Audi B8/8.5 S4/S5 & Q5/SQ5 3.0 TFSI, as well as those with high horsepower numbers in vintage 5-Cylinder applications & 1.8t builds.
Silver spark plug electrodes transfer electricity & heat better than any other spark plug material resulting in consistent peak spark performance required to propagate efficient combustion! This is beneficial for a full complete combustion of the available fuel and air in the combustion chamber, combustion efficiency creates horsepower gains.
Replaces Part Number:
- 101 905 611G
Features:
- Superior Ignition Ability Increases Engine Power allowing detonation resistance in high power applications
- Cooler heat range for some applications allowing detonation resistance in high power applications
- Lower Required Supplied Ignition Voltage
- Good Resistance to Fouling and Easier Starts
- 1.5 mm Silver Fine Wire Center Electrode
- Low ignition voltage requirements (easier for spark to jump over)
- Reduces stress and wear on your coil and other ignition components
- Fires properly even if partially fouled, where standard plugs will fail
Specifications:
- Thread Size: 14mm
- Reach: 19mm - 3/4in
- Hex Size: 16mm-5/8in
- Seat Type: Gasket
- Design: Silver Center Electrode
- Resistor: Yes
- Projected: No
Applications:
Upgrades - These plugs are one to two steps colder versus OEM - one step colder is typically recommended for Stage 2 tunes and higher:
- Audi B8/8.5 S4/S5 with Upgraded Pulleys
- Audi B8 Q5/SQ5 with Upgraded Pulleys
- Audi C7 A6/A7 with Upgraded Pulleys
- Two Steps Colder - Vintage 5-Cylinder (AAN/3B/7A) High Horsepower Builds ~Above 500hp
- Two Steps Colder - 5V 1.8t High Horsepower Builds ~Above 450hp
- Two Steps Colder - 2.7tt High Horsepower Builds ~Above 550hp
NOTE: Apply a thin coating of high temperature anti-seize to the threads prior to installation to avoid corrosion on the threads of the spark plug and/or head.
SKU | BRSK-DR10S |
---|---|
Manufacturer | Brisk Racing |
Part Number Interchange | 101 905 611G |
- Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
As low as $1,283.88 Regular Price $1,537.00
- 034Motorsport B8/B8.5 Audi S4/S5, Q5/SQ5, C7 A6/A7, & D4 A8 3.0 TFSI Performance Software ECU & TCU Transmission Tuning Bundle
From $90.00 Regular Price $100.00
To $1,183.50 Regular Price $1,315.00
- Dynamic+ DSG Software Upgrade for Audi B8/B9.5 S4/S5 DL501 Transmission
As low as $373.50 Regular Price $415.00
- S34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSISpecial Price $373.50 Regular Price $415.00
- Res-X Resonator Delete and X-Pipe, B8/B8.5 Audi S4 3.0 TFSISpecial Price $387.00 Regular Price $430.00
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov