DSG Software Upgrade for MkV/MkVI Volkswagen & 8J/8P Audi, DQ250 Transmission
As low as $50.00
In stock
034Motorsport is proud to offer Stage 1, Stage 2, and Stage 3 DSG Software Upgrades for MkV/MkVI Volkswagen & 8J/8P Audi models equipped with the DQ250 transmission! Most 034Motorsport DSG Software Upgrades are flashed directly through the OBD-II port in 20-25 minutes using the 034Motorsport End User Flashing Kit. The 034Motorsport Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Please Note: Use this product page only if you plan to flash this software to your ECU yourself. To install this software you must have a 034Motorsport Dynamic+ End User Flashing Kit. If you do not have our Dynamic+ End User Flashing Kit and would like to flash from home, click the Icon above and add the Flashing Kit to your cart! (If you do not purchase/own one, you will not be able to flash this software to your ECU and TCU). If you already have a Dynamic+ End User Flashing Kit, simply purchase the software without purchasing the flashing kit.
034Motorsport is proud to offer Stage 1 and Stage 2 DSG Software Upgrades for MkV/MkVI Volkswagen & 8J/8P Audi models equipped with the DQ250 transmission!
Stage 1:
- Increased DSG Clutch Clamping Force
- No Kickdown Downshifts in Manual Mode
- Launch Control Enabled on All Models
- Gear Display Indicator on MFD Enabled in All Driving Modes
- Launch RPM Raised (3400 FWD / 3700 AWD Typical)*
- Shift Speeds Reduced
- Optimized Sport Mode Shift Points
- Improved Responsiveness
Stage 2:
- All Stage 1 Options
- Neutral Rev Limiter Removed
- Even More Aggressive Shift Speeds
- Higher Launch Control RPM (4000 FWD /4500 AWD Typical)*
- Increased Torque Capacity Allowed from ECU (500nm Typical)*
- Rev Limit Increased (ECU Tune Must Increase as Well)
- Windows 10/11 Laptop with Available USB Port
- Power Supply for Laptop
- Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
- Battery Charger, 20AMP minimum (CTEK Brand recommended)
- Available Electrical Outlets
- 034Motorsport OBD-II Adapter
- USB-A to USB-B Cable
- Carrying Case
- User Credentials (Provided Via Email)
- This product is sold for racing use as well as use on vehicles not registered for on highway use.
- By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.
- Manual Mode Upshifts Removed Upon Request
034Motorsport Dynamic+ End User Flashing Kit:
034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Requirements for End User Flashing:
034Motorsport End User Flashing Kit Contents:
034Motorsport Dynamic+ Flashing Portal:
EMISSIONS DISCLAIMER
Please Note:
- Launch control RPM points may vary based on engine/drivetrain combinations. We can also provide a custom launch control RPM for most applications.
- In order to raise the DSG rev limiter, your ECU must also have an increased rev limiter.
EMISSIONS DISCLAIMER
- This product is sold for racing and off-road use only.
- This product is not CARB or EPA compliant, this product is not authorized for use in California on smog controlled vehicles.
- By purchasing this product, you understand this product is sold for competition use on closed roads and is not legal for use in highway or street vehicles.
Make | Model | Years | Chassis |
Audi | A3 | 2006-2013 | 8P |
Audi | RS3 | 2011-2013 | 8P |
Audi | TT | 2008-2015 | 8J |
Audi | TTS | 2008-2015 | 8J |
Audi | TTRS | 2012-2013 | 8J |
VW | Beetle | 2012+ | MkVI |
VW | CC | 2009-2015 | B7 |
VW | Eos | 2006-2015 | MkV |
VW | Golf | 2006-2009 | MkV |
VW | Golf | 2010-2014 | MkVI |
VW | GTI | 2006-2009 | MkV |
VW | GTI | 2010-2014 | MkVI |
VW | Jetta | 2005-2010 | MkV |
VW | Jetta | 2011-2016 | MkVI |
VW | Passat | 2012+ | B7 |
VW | R32 | 2008 | MkV |
VW | R | 2012 | MkVI |
![]() | This 034Motorsport TCU Upgrade can be flashed directly through your vehicle's factory OBD-II diagnostic port by 034Motorsport or any 034Motorsport Dynamic+ Performance Software Dealer listed here.
Installation typically takes 20-25 minutes. | ![]() | End-User Flashing Support & 034Motorsport Dealer Flashing is In Development - Stay Tuned!
Installation typically takes 20-25 minutes. |
SKU | 034-103-250 |
---|---|
Manufacturer | 034Motorsport |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov