Compression Dropping Head Gasket, 1.0 Drop, Audi 5 Cylinder, Multi-Layer Steel
OEM quality, MLS headgasket with increased thickness to drop compression in all hydraulic-lifter 10v and 20v 5 cylinder motors with up to 82mm bore.
This gasket will drop compression 1.0 point over stock.
OEM quality, MLS headgasket with increased thickness to drop compression 1.0 point in all hydraulic-lifter 10v and 20v 5 cylinder motors with up to 82mm bore.
Will drop AAN/3B 20vt motors from 9.3:1 to 8.3:1 giving increased detonation resistance and power potential. Will lower compression 7A and 10v applications approximately 1.0 compression points.
Please Note: Some installations may require removing the rear alignment pin which isn't needed, it can be removed using vise grips or cut off with a dremel wheel.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov