RacingLine Stage 3 Big Brake Kit 355mm 6 Pot / MQB / RED
RacingLine’s stunning Stage 3 Forged Monoblock 6-piston Big Brake upgrade for MQB & MQB 'EVO' is simply a level above anything else on the market, packed with motorsport-inspired features. Designed without compromise for ultimate stopping performance, this kit features 355mm discs (requiring a minimum of 18" wheels), and stunning Bright Red calipers.
RacingLine’s stunning Stage 3 Forged Monoblock 6-piston Big Brake upgrade is simply a level above anything else on the market. Designed without compromise for ultimate stopping performance, it's packed with motorsport-inspired features.
The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market. This kit features 355mm discs (requiring a minimum of 18" wheels), and a stunning bright GTI Red finish to the calipers. RacingLine’s design vision was made possible by their advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail. Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from a single ultra-strong forged billet. Rather than two halves bolted together, the design requires a complex 5-axis CNC machining procedure to construct each caliper in one piece, a technique usually reserved only for the highest-specification motorsport kits. The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing. The strength of this construction allows for thin-profile calipers which as well as providing extreme stiffness and light weight, aids in the all-important wheel clearance packaging. As RacingLine’s kit is engineered exclusively for VWG cars (rather than the generic calipers that others offer), they’ve invested significant development time to define piston sizes perfectly to match to VWG’s master cylinders and servos for beautiful progressive pedal response. Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 11.7lb (5.3kg) vs 18.9lb (8.6kg) for the stock Golf 7R / S3 equivalent. RacingLine’s kit offers you a choice of 355mm or 380mm fully-floating ‘triple-grove’ two-piece rotors giving vastly greater heat capacity, so reducing the effect of fade. These floating high cast carbon rotors are formed from a mixture of high-quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors. The fully floating mounting between rotor and top hat bell allows for thermal expansion and contraction to avoid cracking. The anti-rattle mounts keep it quiet. The 355mm rotor kit requires 18” rims or more for clearance; the 380mm must have a minimum of 19” wheels. Composite Ceramic Fast-Road Pads are included with the kit. RacingLine have thoughtfully specified a generic pad size for this kit, meaning a wide choice of alternative pad brands & compounds are available if you have your personal favorite, or you're planning hard track use. This Stage 3 Brake Kit comes with everything you need for installation: rotors, calipers, mounting brackets, fast road pads, braided steel lines. Plus the option of RacingLine’s Hub Adaptors for extra wheel clearance on OEM wheels. Simply bolt on & drive for a true supercar look and feel in the braking department.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov