Transmission Mount, Density Line, 6-Speed Manual & CVT B6/B7 Audi A4/S4/RS4
034Motorsport Street Density and Track Density Transmission Mounts for the 6-MT and CVT B6/B7 Audi A4/S4/RS4 are now available! These mounts are offer a substantial reduction in drivetrain movement over the factory transmission mount, resulting in improved shift quality and throttle response.
- Tighten M8 Bolts to 25 Nm with Blue Loctite
- Tighten M10 Bolt to 70 Nm
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. 034Motorsport Street Density Transmission Mounts will transfer zero amounts of NVH to the cabin based on user feedback. NVH is subjective so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please email email@example.com for further assistance.
We are VERY excited to be announcing the release of our 034Motorsport Street Density and Track Density transmission mounts for the 6-MT and CVT B6/B7 Audi A4/S4/RS4!
We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!
WHAT THEY ARE: A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications.
STREETDENSITY Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.
TRACKDENSITY Mounts are also solid rubber mounts, but with an 80 durometer approx 90% stiffer than stock, these are solid for all practical purposes and result in ZERO drivetrain movement. Vibrations from the engine are noticeably increased but not horrible. Definitely not smooth and quiet like stock mounts, but in return you get a completely locked down drivetrain with NO slop or deflection. These are perfect for the street/track enthusiast who doesn't mind a marked increase in vibration from the drivetrain.
NOTE, THIS IS NOT AN OE MOUNT, OR AN RS4 MOUNT, AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.
Mounts will fit all 6-speed manual transmission and CVT B6/B7 chassis 1.8T, 2.0T, 3.0L, 3.2L, and 4.2L cars and includes all hardware needed to install.
Choose stiffness above price PER mount, one car will need 1 mount.
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov