Transmission Mount, Density Line, Tiptronic B6/B7/C5 Audi A4/S4/S6/RS6
We are VERY excited to be announcing the release of our 034Motorsport Street Density and Track Density transmission mounts for Tiptronic equipped Audis!
NVH Levels: None
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. 034Motorsport Street Density Transmission Mounts will transfer zero amounts of NVH to the cabin based on user feedback. NVH is subjective so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please email techsupport@034motorsport.com for further assistance.

Product Description:
We are VERY excited to be announcing the release of our 034Motorsport Street Density and Track Density transmission mounts for a wide range of Audis!
We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!
WHAT THEY ARE:
A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications.
STREETDENSITY
Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.
TRACKDENSITY
Mounts are also solid rubber mounts, but with an 80 durometer approx 90% stiffer than stock, these are solid for all practical purposes and result in ZERO drivetrain movement. Vibrations from the engine are noticeably increased but not horrible. Definitely not smooth and quiet like stock mounts, but in return you get a completely locked down drivetrain with NO slop or deflection. These are perfect for the street/track enthusiast who doesn't mind a marked increase in vibration from the drivetrain.
NOTE, THIS IS NOT AN OE MOUNT, OR AN RS4 MOUNT, AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.
Mounts will fit all Tiptronic transmission B6 and B7 chassis 1.8T, 2.0T, 3.0L, 3.2L, and 4.2L cars and C5 Audi S6 and RS6. Includes all hardware needed to install.
Choose stiffness below, price PER mount, one car will need 2 mounts.
SKU | 034-509-4006 |
---|---|
Manufacturer | 034Motorsport |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov