Control Arm Kit, Density Line, B6/B7 Audi A4/S4/RS4
Save a ton of money over factory Audi by buying the complete control arm kit over piecing together parts. This kit is designed to exceed the OE arm quality, as we worked with a leading OE supplier and had them make arms for us to our specifications. Density Line Control Arm Bushings feature a stiffer, higher durometer rubber for crisper handling and longer life.
NVH Levels: None - LowNVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. 034Motorsport Control Arms with Density Line Rubber Bushings transfer none to low amounts of NVH to the cabin based on user feedback. NVH is subjective so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure to components are touching each other and email techsupport@034motorsport.com for further assistance.
Does your B6/B7 Audi A4/S4/RS4 have that "not so fresh" feeling? Does it clunk and clack over driveways and speed bumps? Does it have the steering response of a '59 Chebby?
It's ok! Your undercarriage just needs a little work, and it won't require any cream, and you're not the only girl on the block. This is a common problem with all B6/B7 chassis cars.
Fix it once and for all with a complete Density Line Control Arm Kit from 034Motorsport. No, these are not parts for 7 cars, which is how it may appear; your car really uses this many links to create the sharp handling and buttery smooth ride you're used to. Just make sure they are tight for slop free, fresh handling.
Save a ton of money by buying the complete kit instead of piecing together parts. Our control arms exceed the factury arm quality. We went to an OE supplier for Audi and had them make arms for us to our specifications. Density Line bushings feature slightly stiffer durometer rubber for crisper handling and longer life. We go direct to the source for an improved product, by cutting out several middle men, we an offer you a higher quality part at an exceptional savings.
Don't be fooled by cheap imitations! Our 034Motorsport Density Line Control Arm Kits are the real deal, and we stand behind them with a 1-year replacement warranty from the time of purchase!*
NOTE 1: Hardware kit with all new nuts and bolts is now included. Only what is pictured is supplied, only "stressed must replace" hardware is included wtih this kit. New hardware for the sway bar end links is not supplied in this kit.
*NOTE 2: To ensure a long life for these control arms, when they are installed, it is IMPERATIVE that the suspension be compressed to static ride height before any suspension pivot bushings are tightened. If this is not done, bushings will tear as the twisting forces on them will be much higher than is intended. If you have any questions about this, please contact us to verify, if this is not done any warranty will be voided.
Please Note: We highly recommend using our upgraded B5/B6/B7/C5 Audi Heavy Duty Tie Rod End when installing this kit.
SKU | 034-401-1004 |
---|---|
Manufacturer | 034Motorsport |
Part Number Interchange | 8D0407505K, 8D0407506K, 8D0407509E, 8D0407510E, 8E0407151M, 8E0407693E, 8E0407694E, 8E0411317, 8E0411318 |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov