DSG Software Upgrade for MkVII Volkswagen & 8S/8V Audi, DQ250 Transmission
As low as $400.00
In stock
034Motorsport is proud to offer this DSG Software Upgrade for MkVIIVolkswagen & 8S/8V Audi models equipped with the DQ250 transmission! Most 034Motorsport DSG Software Upgrades are flashed directly through the OBD-II port in 20-25 minutes using the 034Motorsport End User Flashing Kit. The 034Motorsport Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Please Note: Use this product page only if you plan to flash this software to your ECU yourself. To install this software you must have a 034Motorsport Dynamic+ End User Flashing Kit. If you do not have our Dynamic+ End User Flashing Kit and would like to flash from home, click the Icon above and add the Flashing Kit to your cart! (If you do not purchase/own one, you will not be able to flash this software to your ECU and TCU). If you already have a Dynamic+ End User Flashing Kit, simply purchase the software without purchasing the flashing kit.
034Motorsport is proud to offer this DSG Software Upgrade for MkVII Volkswagen & 8S/8V Audi models equipped with the DQ250 transmission!
Features:
- Increased DSG Clutch Clamping Force
- Shift Speeds Increased
- Optimized Sport Mode Shift Points
- Improved Responsiveness
- No Kickdown Downshifts in Manual Mode
- Launch Control Enabled on All Models
- Gear Display Indicator on MFD Enabled in All Driving Modes
- Launch RPM Raised (3400 FWD / 3700 AWD Typical)*
Please Note:
- Launch control RPM points may vary based on engine/drivetrain combinations. We can also provide a custom launch control RPM for most applications.
- In order to raise the DSG rev limiter, your ECU must also have an increased rev limiter.
034Motorsport Dynamic+ End User Flashing Kit:
034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Requirements for End User Flashing:
- Windows 10/11 Laptop with Available USB Port
- Power Supply for Laptop
- Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
- Battery Charger, 20AMP minimum (CTEK Brand recommended)
- Available Electrical Outlets
034Motorsport End User Flashing Kit Contents:
- 034Motorsport OBD-II Adapter
- USB-A to USB-B Cable
- Carrying Case
- User Credentials (Provided Via Email)
034Motorsport Dynamic+ Flashing Portal:
EMISSIONS DISCLAIMER
- This product is sold for racing use as well as use on vehicles not registered for on highway use.
- By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.
Make | Model | Years | Chassis |
Audi | A3 | 2015+ | 8V |
Audi | S3 | 2015+ | 8V |
Audi | TT | 2016+ | 8S |
Audi | TTS | 2016+ | 8S |
VW | Golf | 2015+ | MkVII |
VW | Golf R | 2015-2017 | MkVII |
VW | GTI | 2015+ | MkVII |
![]() | This 034Motorsport TCU Upgrade can be flashed directly through your vehicle's factory OBD-II diagnostic port at home using the 034Motorsport Dynamic+ End User Flashing Kit or by bringing your vehicle to 034Motorsport or any 034Motorsport Dynamic+ Performance Software Dealer listed here.
Installation typically takes 20-25 minutes. |
SKU | 034-103-254 |
---|---|
Manufacturer | 034Motorsport |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov