Street Density Rear Shock Mount, B9/B9.5 Audi A4/S4, A5/S5, & Allroad
034Motorsport's Street Density Rear Shock Mounts for the B9/B9.5 Audi A4/S4, A5/S5, & Allroad are engineered for increased performance and durability over the factory rear shock mounts. Featuring 75 Durometer Density Line Rubber, these performance rear shock mounts are able to cope with increased loads from spirited driving and upgraded suspension components.
Designed to be a complete, drop-in replacement for the factory rear shock mounts, Street Density Rear Shock Mounts significantly reduce deflection under hard cornering, which helps maintain proper suspension geometry for better handling. In addition, the Density Line Rubber features enhanced bonding to the cast aluminum mount body - reducing the likelihood of separation and dreaded "clunk" associated with the factory mounts.
Please Note: Street Density Rear Shock Mounts are priced individually. Two mounts are required per vehicle.
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. Based on user feedback, 034Motorsport Strut Mounts transfer Low amounts of NVH to the cabin. NVH is subjective, so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure to components are correctly installed & torqued to spec and email techsupport@034motorsport.com for further assistance.
Product Description:
Street Density Rear Shock Mounts for the B9/B9.5 Audi A4/S4, A5/S5, & Allroad are engineered for increased performance and durability over the factory rear shock mounts. Featuring 75 Durometer Density Line Rubber, these performance rear shock mounts are able to cope with increased loads from spirited driving and upgraded suspension components.
The factory rear shock mounts to the car by way of a very soft rubber shock mount, which allows the shock to move laterally front to back and side to side, as well as deflects up and down to reduce NVH from road bumps/cracks. This soft rubber wears out over time, and causes excessive shock movement, resulting in worse ride quality and imprecise handling characteristics along with clunking sounds as it deteriorates further. The OEM shock mounts wear even faster when subjected to high-performance driving conditions, such as back roads or road course events.
Designed to be a complete, drop-in replacement for the factory rear shock mounts, Street Density Rear Shock Mounts significantly reduce deflection under hard cornering, which helps maintain proper suspension geometry for better handling. In addition, the Density Line Rubber features enhanced bonding to the cast aluminum mount body - reducing the likelihood of separation and dreaded "clunk" and premature wear associated with the factory mounts.
Features:
- Complete, Drop-In Replacement for Factory Rear Shock Mounts
- Manufactured with 75 Durometer Rubber
- OE is 65 Durometer
- High-Quality Cast Aluminum Mount Body
- Reduced Strut Deflection for Improved Handling
- Vulcanized Rubber for Increased Longevity
Replaces:
- 8W0 513 353
- 8W0 513 353 A
- 8W0 513 353 B
Make | Model | Years | Chassis | Engine |
---|---|---|---|---|
Audi | A4 | 2017-Present | B9/B9.5 | 2.0 TFSI |
Audi | A5 | 2017-Present | B9/B9.5 | 2.0 TFSI |
Audi | allroad | 2017-Present | B9/B9.5 | 2.0 TFSI |
Audi | S4 | 2018-Present | B9 | 3.0 TFSI |
Audi | S5 | 2018-Present | B9/B9.5 | 3.0 TFSI |
SKU | 034-601-3007 |
---|---|
Manufacturer | 034Motorsport |
Part Number Interchange | 8W0 513 353 8W0 513 353 A 8W0 513 353 B |
- X34 Carbon Fiber Intake Systems, Audi B9/B9.5 S4/S5
From $752.00
To $1,172.00
- Density Line Control Arm Kits, B9/B9.5 Audi A4/S4/RS4, A5/S5/RS5
From $875.00
To $1,050.00
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov