Billet Aluminum Dogbone Mount Insert for 2009+ MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8J/8P Audi TT/A3
As low as $43.20 Regular Price $48.00
034Motorsport's Billet Aluminum Lower Dogbone Mount Insert for 2009+ MkV/MkVI Volkswagen Golf/Jetta/GTI/GLI & 8J/8P Audi TT/A3 is designed to fill the large void in the factory dogbone mount, and limit transmission movement without sacrificing ride quality or introducing excessive additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop to ensure that you experience crisper shifts and a smoother driving experience.
Please Note: We highly recommend purchasing our Billet Aluminum Dogbone Mount Arm along with the upper and lower inserts, as the factory cast arm on 2.0T models can fail when vehicles are launched aggressively or shifted hard. This arm is known to fail even on completely stock vehicles.
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. 034Motorsport Dogbone Mount Inserts transfer low to medium amounts of NVH to the cabin based on user feedback. 034Motorsport Dogbone Inserts do not create any NVH while idling and some light NVH may be expected on initial take off in drive or reverse. NVH is subjective so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure to components are touching each other and email firstname.lastname@example.org for further assistance.
034Motorsport is pleased to present a new performance dogbone mount (torque arm bushing) insert upgrade for the MkV/MkVI Volkswagen & 8J/8P Audi!
Have you increased the power output of your vehicle beyond the factory figures and are in need of a performance mount solution to effectively deliver that power to the ground? Are you tired of excess engine/transmission movement hindering shift quality and performance? The factory dogbone mount is one of the weakest links in the drivetrain, and is engineered with voids that allow for movement, isolating the driver from the road.
This precision-machined billet aluminum lower dogbone mount insert is designed to fill the large voids in the factory dogbone mount, and limit transmission and engine movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. By filling the void in the factory mount, this insert eliminates the associated slop and ensures that you're experiencing crisper shifts and a more direct, connected driving experience.
Engineered to work in unison with the factory rubber mount, this insert was designed using CAD software and thoroughly tested and refined to provide noticeable slop reduction without introducing excessive noise or vibration into the cabin, which is common with lesser designs. Unlike polyurethane insert options on the market, this billet aluminum part will not pack and wear over time, and guarantees long-lasting performance.
This mount was thoroughly tested by 034Motorsport and independent Audi/Volkswagen enthusiasts before release. Installation is very simple, can be performed in minutes, and is completely reversible.
- T6-6061 Billet Aluminum Construction
- CNC-Machined In-House
- Clear Anodized Finish for Durability
- Engineered to Fill Void In Factory Transmission Mount
- Drastically Reduces Transmission Movement During Shifting & Deceleration
- Improves Shifting Feel, Resulting in Crisper Shifts
- Virtually No Additional NVH Transfer Inside Cabin
- Easy, Straightforward Installation Takes Minutes!
- 034Motorsport Billet Aluminum Lower Dogbone Mount Insert
UPPER DOGBONE MOUNT INSERT
The 034Motorsport Upper Dogbone Mount Insert (patent pending) recommended for any MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI and 8P Audi A3 & 8J Audi TT/TTS/TTRS using any dogbone mount and dogbone mount insert, and is strongly recommended when using the OEM dogbone mount and a lower insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs that induce wheel-hop, will cause the upper and lower dogbone mounts to exert a bending moment on the dogbone mount arm, causing it to bend, and in some cases fail. When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform as designed during these violent events.
- CNC machined 6061 billet aluminum upper insert
- Clear anodized for a beautiful, corrosion resistant finish
- Water-jet cut aluminum lower insert spacer
- Lower insert spacer ensures upper and lower inserts don't touch and vibrate
- Eliminates bending moment in dogbone arm
- Ensures even compression of upper and lower dogbone mount pucks
- Eliminates wear on lower dogbone mount puck
- 034Motorsport Upper Dogbone Mount Insert
- 034Motorsport Lower Dogbone Mount Insert Spacer
Any dogbone mount combined with a lower dogbone mount insert dramatically improves the feel and responsiveness of the drivetrain during spirited driving. However, this combination of modifications has revealed a scenario that applies forces to the dogbone mount arm that it was not designed for. These forces have been seen to break OEM dogbone mounts. While billet aluminum aftermarket dogbone mounts have proven to be significantly stronger than OEM and resist this bending force, adding the upper insert removes this bending force while evenly distributing forces on both the upper and lower dogbone mount pucks, reducing excessive wear on the lower puck.
The lower dogbone mount insert limits compliance of the lower dogbone mount puck by filling large voids in the puck. During normal and spirited driving, this reduction in compliance results in more direct transitional response of the drivetrain to accelerative and decelerative forces. The driver feels more direct throttle response through the drivetrain without introducing a significant amount of NVH.
However, violent drivetrain shocks, such as burn-out induced wheel-hop, introduce additional forces that can cause damage to the dogbone mount arm. In these violent events, the lower puck motion is limited by the dogbone insert, but the upper puck in unconstrained and is free to move forward.
This means that the entire puck assembly rotates forward at an angle towards the front of the car. Because the dogbone mount arm is clamped into the puck assembly, the rotation of the puck assembly generates a bending moment applied to the dogbone mount arm that it was not designed for.
Our engineering team developed the 034Motorsport Billet Upper Dogbone Mount Insert to solve the issue. This insert slips into the front void of the upper dogbone mount puck, limiting the forward motion of the upper puck to match the limited forward-motion of the lower puck with the lower insert installed. The result is an upper and lower insert package that eliminates the rotation inside the puck assembly during extreme drivetrain shocks, and keeps the forces acting on the dogbone arm in the direction the arm was designed for. Subsequent testing showed no signs of bending or stress in the dogbone mount arm with both the upper and lower dogbone mount inserts installed. Watch the demonstration video below to see how the dogbone mount pucks move with just the lower insert, and the upper and lower insert combined.
|VW||Tiguan||2009-2016||I & II|
|SKU||034-509-1021 & 034-509-1040|
- Sway Bar End Links, Motorsport, Rear, Adjustable, 8P & 8J Audi TT/A3, MkV & MkVI Volkswagen Jetta GTI R32 RabbitSpecial Price $183.60 Regular Price $204.00
- Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVOSpecial Price $265.50 Regular Price $295.00
- Spherical Rear Trailing Arm Kit, MkV/MkVI Volkswagen Golf/Jetta/GTI/R & 8J/8P Audi A3/S3/RS3/TT/TTS/TTRSSpecial Price $439.20 Regular Price $488.00
- Catch Can Kit, 8J/8P Audi TT/A3 & MkV Volkswagen GTI/GLI EA113 2.0T FSISpecial Price $414.00 Regular Price $460.00
- Strut Mount, Track Density, MkV & MkVI Volkswagen, 8J & 8P AudiSpecial Price $61.20 Regular Price $68.00
- Motor Mount Pair, Density Line, MkV & MkVI Volkswagen, 8J & 8P Audi, 2.0T FSIAs low as $263.70 Regular Price $293.00
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov