Dynamic+ Lowering Springs For 8V Audi A3/S3

Product Description:

Developed specifically for vehicles equipped with Audi Magnetic Ride, Dynamic+ Lowering Springs are engineered to improve handling performance and deliver superb ride quality. Designed to as a true no-compromise solution, Dynamic+ Lowering Springs provide an aggressive yet functional stance, and reward drivers with precise vehicle control and OEM+ comfort levels.

Dynamic+ Lowering Springs were thoroughly tested on the street and track on 034Motorsport's R460 8V Audi S3, and by independent Audi enthusiasts before release.

Each set of Dynamic+ Lowering Springs is manufactured in the USA at an ISO 9001 certified facility, and tested to 034Motorsport's exacting specifications to ensure they deliver unmatched performance for the discerning Audi A3 and S3 enthusiast.

Why Are Dynamic+ Coil Spring Sleeves Needed?

When designing 034Motorsport Dynamic+ Lowering Springs, we are not simply making a shorter spring. With lowering springs, the misconception is that the overall coil length is shorter. The spring itself is actually the same length as the OEM spring but they are designed with some of the coils in the spring closer together, which "stack" under weight, giving you the lowered ride height. Since the coils are physically closer to one another, when the suspension compresses and decompresses, the coils stack and rise.

Coils stacking is engineered into the design of the majority of aftermarket lowering springs, aftermarket coilovers, and sometimes even OEM suspension. This depends largely on the design of the car during the engineering process.

In some cases when these coils stack under heavy, they can create excess noise. For this reason, 034Motorsport offers Dynamic+ Coil Spring Sleeves to dampen the noise between coils. Not all Dynamic+ Lowering Springs will require these Coil Spring Sleeves, and for those that do, 034Motorsport includes a pair of Coil Spring Sleeves that are pre-installed in the appropriate location.

Features:

• Improved Handling Performance
• Superb Ride Quality
• Improved Chassis Dynamics
• Reduced Body Roll & Understeer
• Compatible with Audi Magnetic Ride
• Provides Approximately 0.75" of Lowering
• Lightweight, High-Strength Construction
• Coil Spring Sleeves Included
• Shot Peened & Powdercoated
• Made in USA at ISO 9001 Certified Facility

Ride Height:

• Front - Approximately 0.75" Lower
• Rear - Approximately 0.75" Lower

Spring Rates:

• Front - 310 Pounds/Inch (Linear)
• Rear - 400 Pounds/Inch (Linear)

Application Guide:

• 2015 - Present Audi S3 (8V - MQB) - With Magnetic Ride
• 2015 - 2016 Audi A3 (8V - MQB) - With Magnetic Ride
  • NOTE: DOES NOT FIT NON-MAGNETIC RIDE AUDI A3 8V OR 8V.5

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.

Learn More: www.p65warnings.ca.gov